第一章 制图的基本知识(Basic Knowledge of Drawing) 1-1 字体练习(Lettering Exercises) 1-2 图线练习(Lines Exercises) 1-3 标注尺寸(Dimensioning) 1-4 几何作图(Geometric Construction) 1-5 作业1基本练习(Basic Exercises) 第二章 正投影法基础(Basic Orthographic Projection Theory) 2-1 投影基础(Basis of Projection) 2-2 画平面立体的三面投影(Draw Three Projections of Polyhedral Solids) 第三章 点、直线、平面的投影以及平面与平面立体相交(The Projection of Points,Lines,Planes and Intersection of Planes and Solids) 3-1 点的投影(Projection of Points) 3-2 直线的投影(一)(Projection of Lines) 3-3 直线的投影(二)(Projection of Lines) 3-4 平面的投影(一)(Projection of Planes) 3-5 平面的投影(二)(Projection of Planes) 3-6 平面上的点和线、平面与平面立体相交(Points and Lines in the Plane,Intersection of Planes and Polyhedral Solids) 3-7 平面立体的切割与穿孔(Cutting and Perforating on Polyhedral Solids) 第四章 基本曲面立体的投影(Projections of Curved Solids) 4-1 回转体及其表面上的点、线(Rotary Solids and Elements on Their Surfaces) 4-2 平面与回转体表面相交(一)(Intersection of Planes and Rotary Solids) 4-3 平面与回转体表面相交(二)(Intersection of Planes and Rotary Solids) 4-4 两回转体表面相交(一)(Intersection of Two Rotary Solids) 4-5 两回转体表面相交(二)(Intersection of Two Rotary Solids) 4-6 根据所给的水平投影,用“√”标识出能构成立体的正面投影(Select Correct Frontal Projection) 4-7 根据所给的正面及水平投影,用“√”标识出能构成立体的侧面投影(Select Correct Profile Projection) 第五章 组合体(Composite Solids) 5-1 根据立体图补画投影中所缺图线(Add Missing Details According to the Pictorial Drawings) 5-2 补画投影中所缺图线(Add Missing Details) 5-3 根据立体图所注尺寸,用1∶1画出组合体三面投影(Draw Three Projections of Composite Solids) 5-4 选择题(一)(Choice Questions) 5-5 选择题(二)(Choice Questions) 5-6 标注组合体尺寸(一)(Dimension Composite Solids) 5-7 标注组合体尺寸(二)(Dimension Composite Solids) 5-8 第1、2、3题补漏线,第4、5、6题补画第三面投影(一)(Add Missing Details and Draw the Third Projections) 5-9 读懂组合体的两面投影图,补画第三面投影(二)(Draw the Third Projections) 5-10 读懂组合体的两面投影图,补画第三面投影(三)(Draw the Third Projections) 5-11 作业2组合体三面投影(Three Projections of Composite Solids) 第六章 轴测图(Axonometric Projections) 6-1 根据立体的投影图,在指定位置画出立体的轴测图(Draw Axonometric Projections at Specified Positions According to the Projections of Solids) 6-2 根据所给投影图,徒手画立体的轴测图,1、2题正等测,3、4题斜二测(Draw Isometric Projections and Cabinet Axonometry Projections Freehand According to the Projections Given) 第七章 机件常用的表达方法(General Principles of Representation of Machine Components) 7-1 基本视图及其他视图(Principle Views and the Other Views) 7-2 剖视图的基本概念(一)(Basic Concept of Sectional Views) 7-3 剖视图的基本概念(二)(Basic Concept of Sectional Views) 7-4 全剖视图(Full Sectional Views) 7-5 半剖视图(Half-sectional Views) 7-6 局部剖视图(Local Sectional Views) 7-7 单一剖切、几个平行的剖切面剖切、几个相交的剖切面剖切(Single Cutting Plane,Multiple Parallel Cutting Planes,Multiple Intersecting Cutting Planes) 7-8 断面图(Cuts) 7-9 局部放大图及常用简化画法(Drawing of Partial Enlargement and General Simplified Representations) 7-10 表达方法的综合应用(Comprehensive Application of Representation Principles) 7-11 作业3机件的表达方法(Representation Methods of Parts) 第八章 标准件、齿轮和弹簧(Standard Parts,Gears and Springs) 8-1 螺纹的规定画法和标注(Specified Drawing and Marking of Threads) 8-2 螺纹紧固件(一)(Screw Fasteners) 8-3 螺纹紧固件(二)(Screw Fasteners) 8-4 作业4螺纹紧固件的连接画法(Joining Drawing Methods of Screw Fasteners) 8-5 直齿圆柱齿轮、圆柱销(Spur Cylindrical Gear,Parallel Pin) 8-6 普通平键、圆柱螺旋压缩弹簧(Square and Rectangular Key,Cylindrical Helical Compression Spring) 第九章 零件图(Detail Drawings) 9-1 表面结构、几何公差、极限与配合(Surface Texture,Geometrical Tolerance,Limits and Fits) 9-2 读零件图(一)轴(Read Detail Drawing of a Shaft) 9-3 读零件图(二)轴承盖(Read Detail Drawing of a Baring Cover) 9-4 读零件图(三)十字接头(Read Detail Drawing of a Cruciform Joint) 9-5 读零件图(四)底座(Read Detail Drawing of a Base) 9-6 作业5零件测绘(Mapping Parts) 第十章 装配图(Assembly Drawings) 10-1 根据千斤顶的轴测图和零件图拼画装配图(Make an Assembly Drawing of a Jack According to the Axonometric Projection and Detail Drawings) 10-2 作业6由零件图拼画装配图(Draw an Assembly Drawing from Detail Drawings) 作业7 由装配图拆画零件图(Dismantle Detail Drawings from an Assembly Drawing) 10-3 读螺纹调节支承装配图(Read the Assembly Drawing of Thread Adjustment Bearing) 10-4 读虎钳装配图(Read the Assembly Drawing of Jaw Vice) 10-5 读蝴蝶阀装配图(Read the Assembly Drawing of Butterfly Valve) 10-6 读柱塞泵装配图(Read the Assembly Drawing of Piston Pump) 参考文献(References)
京公网安备 11010102004214号