目录(Contents) 第一章 制图的基本知识(Basic Knowledge of Drawing) 1-1 字体练习(Lettering exercises)1 1-2 图线练习(Lines exercises)2 1-3 标注尺寸(Dimensioning)3 1-4 几何作图(Geometric construction)4 1-5 作业1基本练习(Basic exercises)5 第二章 正投影法基础(Basic Orthographic Projection Theory) 2-1投影基础(Basis of projection)6 2-2画平面立体的三面投影(Draw three projections of the polyhedral solids)7 第三章 点、直线、平面的投影以及平面与平面立体相交(The Projection ofPoints, Lines ,Planes and Intersection of Planes and Solids) 3-1 点的投影(Projection of points)8 3-2 直线的投影(一)(Projection of lines)9 3-3 直线的投影(二)(Projection of lines)10 3-4 平面的投影(一)(Projection of planes)11 3-5 平面的投影(二)(Projection of Planes)12 3-6 平面上的点和线、平面与平面立体相交(Points and lines on the plane, intersection of planes and polyhedral solids)13 3-7 平面立体的切割与穿孔(Cutting and perforating on polyhedral solids )14 第四章 基本曲面立体的投影(Projection ofCurved Solids) 4-1 回转体及其表面上的点、线(Rotary solids and elements on their surfaces)15 4-2 平面与回转体表面相交(一)(Intersection of planes and rotary solids)16 4-3 平面与回转体表面相交(二)(Intersection of planes and rotary solids)17 4-4 两回转体表面相交(一)(Intersection of two rotary solids)18 4-5 两回转体表面相交(二)(Intersection of two rotary solids)19 4-6 根据所给的水平投影,指出能构成立体的正面投影 (Select correct frontal projection)20 4-7 根据所给的正面投影及水平投影,指出能构成立体的侧面投影(Select correct profile projection)21 第五章 组合体 (Composite Solids ) 5-1 根据立体图补画投影中所缺图线(Add missing details according to the pictorial drawings)22 5-2 补画投影中所缺图线(Add missing details)23 5-3 画组合体三面投影(Draw threeprojections of composite solids )24 5-4 选择题(一)(Choice question)25 5-5 选择题(二)(Choice question) 26 5-6 标注组合体尺寸(一)(Dimension composite solids)27 5-7 标注组合体尺寸(二)(Dimension composite solids)28 5-8 第1、2、3题补漏线,第4、5、6题读懂组合体的两面投影,补画第三面投影(一)(Add missing details and draw the third projections)29 5-9 补画第三面投影(二)(Draw the third projection)30 5-10 补画第三面投影(三)(Draw the third projections)31 5-11 作业2 组合体三面投影(Three projections of composite solids)32 第六章 轴测图(Axonometric projections) 6-1根据立体的投影图,在指定位置画出立体的轴测图(Draw axonometricprojections at specified positions according to the projections of solids)33 6-2根据所给投影图,徒手画立体的轴测图(Draw isometric projections and cabinet axonometry projections Freehand according to the projections given)34 第七章 机件常用的表达方法(Common Representations for Parts) 7-1 基本视图及其他视图( Principle views and the other views)35 7-2 剖视图的基本概念(一)(Basic concept of sectional views)36 7-3 剖视图的基本概念(二)(Basic concept of sectional views)37 7-4 全剖视图(Full sectional views)38 7-5 半剖视图(Half-sectional views)39 7-6 局部剖视图(Local sectional views)40 7-7 单一剖切、几个平行的剖切面剖切、几个相交的剖切面剖切(Single cutting plane, multiple parallel cutting planes, multiple intersecting cutting lanes)41 7-8 断面图(Cuts) 42 7-9 局部放大图及常用简化画法(Drawing of partial enlargement and general simplified representations)43 7-10 表达方法的综合应用(Comprehensive application of representation principles)44 7-11 作业3 机件的表达方法(Representation methods of parts)45 第八章 标准件、齿轮和弹簧(Standard Parts, Gears and Springs) 8-1 螺纹的规定画法和标注(Specified drawing and marking of threads)46 8-2 螺纹紧固件(一)(Screw fasteners )47 8-3 螺纹紧固件(二)(Screw fasteners )48 8-4 作业4螺纹紧固件连接( Joint of screw fasteners )49 8-5 直齿圆柱齿轮、圆柱销(Spur cylindrical gear, parallel pin)50 8-6 普通平键、圆柱螺旋压缩弹簧(Square and rectangular key, cylindrical helical compression spring)51 第九章 零件图(Detail Drawings) 9-1 表面结构、几何公差、极限与配合(Surface texture, geometrical tolerance, limits and fits)52 9-2 读零件图(一)轴(Read detail drawing of a shaft)53 9-3 读零件图(二)轴承盖(Read detaildrawing of a baring cover) 54 9-4 读零件图(三)十字接头(Read detail drawing of a cruciform)55 9-5 读零件图(四)底座 (Read detail drawing of a base) 56 9-6 作业5零件测绘 (Mapping parts)57 第十章 装配图 (Assembly Drawings) 10-1 根据千斤顶的轴测图和零件图拼画装配图(Make an assembly drawing of a jack according to the axonometric projection of a jack and detail drawings)58 10-2 作业6由零件图拼画装配图(Draw an assembly drawing from detail drawings)作业7由装配图拆画零件图 (dismantle detail drawings from an assembly drawing) 59 10-3 读螺纹调节支承装配图(Read the assembly drawing ofthread adjustment bearing)60 10-4 读虎钳装配图(Read the assembly drawing ofjaw vice)61 10-5 读蝴蝶阀装配图(Read the assembly drawing of butterfly valve)62 10-6 读柱塞泵装配图(Read the assembly drawing of piston pump)63 参考文献(References)